Physical
Length: 411 mm (16.2 in.) Width: 294 mm (11.6 in.) Height with hanging bracket: 309 mm (12.2 in.) Dry weight: 7.3 kg (16.1 lbs.) Filled weight: 8.9 kg (19.7 lbs.)

Performance
Coverage volume: 200 m3 (7062 ft3) per minute Fluid consumption (max.): 60 ml per minute Maximum operating time at full output: 45 seconds Ready time: 8 minutes

Control
Control options: Hard-wired remote control or 4-channel wireless remote control (both included) Control parameters: On/off operation

Construction
Housing: Steel and aluminum Color: Black Heat exchanger: 850 W, thermally protected Fluid pump: Oscillating piston, high pressure Fluid management: Fluid out sensing, LED illuminated sight glass Fluid reservoir: 1.6 liter, removable Hanging bracket: Integrated adjustable yoke and safety eyebolt Wired remote control unit (included): 4.5 m (15 ft.) cable Wireless remote control unit (included): 4-channel, 30 m (100 ft.) range

Installation
Mounting: Standing or hanging Orientation: Up to +/- 45° from horizontal Clearance around machine: 500 mm (20 in.)

Connections
AC power: IEC male inlet, C14 Wired remote: DIN 41524, 5-pin, 45°, 180° inlet Wireless remote receiver: DIN 41524, 5-pin, 45°, 180° inlet

Electrical
EU model AC power: 220-240 V nominal, 50/60 Hz Main fuse: 5 AT (slow blow), 250 V Typical power and current at 240 V: 950 W, 3.8 A* US model AC power: 100-120 V nominal, 50/60 Hz Main fuse: 10 AT (slow blow), 125 V Typical power and current at 100 V: 950 W, 9.0 A* Typical power and current at 120 V: 900 W, 7.5 A* *Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

Thermal
Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5°C (41°F) Exterior surface temperature, steady state: 50°C (122°F) Maximum nozzle temperature: 300° C (572°F)