Martin Rush CWL LED Strobe

This bright and compact LED linear strobe utilises 99 x 3 W Cree XP-D LEDs with a reflector design that offers a traditional Xenon strobe look with a 17,000 lumen output. From a single flash to a blinder effect, the RUSH™ Strobe CWL is the perfect companion for mobile DJs, lounge bars, venues and cruise ships.

 

£/Day £25.00
£/Week£50.00

Quote: £ 25.00 + VAT

SKU: L-SB3 Categories: ,

99 x Cree XP-D 3 W cold white LEDs
Reflector design
1-25 FPS and blinder effect
Compact LED linear strobe
17,000 lumens output
Color system: 99 x cold white LED
87° beam angle
8 strobe macros

Physical
Length: 505 mm (19.9 in.) Width: 140 mm (5.5 in.) Height: 226 mm (8.9 in.) Weight: 4.0 kg (8.9 lbs.)
Dynamic Effects
Strobe rate: 0 – 25 Hz Strobe duration: 0 – 10 ms (50 Hz supply), or 0 – 8.3 ms (60 Hz supply) Blinder effect: Continuous with auto fade Special effects: Ramp up/down, up-down, random flash, lightning, blinder, single flash
Control and Programming
Control options: DMX, stand-alone, master/slave, sound trigger DMX channels: 1 or 4 Setting and addressing: Control panel with LCD display Compliance: USITT DMX512/1990
Optics
Beam angle: 87° Light source: 99 x 3 W CREE white XB-D LED Color temperature: 7000-8000 K Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under test conditions
Construction
Color: Black Housing: Steel and aluminum Protection rating: IP 20
Installation
Mounting points: Bracket with 13.5 mm holes Orientation: Any Location: Indoor use only, must be fastened to surface or structure Minimum distance to illuminated surfaces: 0.2 m (8 in.) Minimum distance to combustible materials: 0.1 m (4 in.) Minimum clearance around fans and vents: 0.1 m (4 in.)
Connections
AC power in/thru: Neutrik PowerCon DMX data in/thru: 3-pin and 5-pin locking XLR
Electrical
AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Diode bridge
Typical Power and Current
110 V, 60 Hz: 2.5 A, 250 W, PF 0.9 230 V, 50 Hz: 2.7 A, 380 W, PF 0.6 Measurements made at nominal voltage. Allow for a deviation of +/-10%. PF = Power Factor
Thermal
Cooling: Forced air (temperature regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min): 0° C (32° F)
Approvals
EU safety: EN 60598-2-17 (EN 605981-1) EU EMC: EN 55015, EN55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573

L-SB3.pdf