QSC K10 mid-high Active Speaker

Day £35 + VAT
Week £70 + VAT
Add to quote

Quote: £ 35.00 + VAT

10” Woofer; 1.75” diaphragm compression driver
90° conical DMT coverage
Maximum SPL 129 dB peak
Attractive and professional appearance
Rugged ABS enclosures
16-gauge powder coated steel grille

1000-watt continuous Class D power modules in all models
Functions as a monitor wedge
Comfortable ergonomic handles
35 mm pole sockets with Tilt-Direct™
M10 rigging points
Eyebolt and yoke mount accessories available
Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
Extensive DSP enhances system performance:
DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural “dead” or “hot” frequency zones.
Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.

Add to quote
SKU: A-SS-A2 Categories: ,

Configuration
Multipurpose 2-way
Transducers
Low-frequency
High-frequency

10″ cone transducer
1.75″ diaphragm compression driver
Frequency Response (-6 dB)
60 Hz – 18 kHz
Frequency Range (-10 dB)
56 Hz – 20 kHz
Nominal Coverage (-6 dB)
90° conical DMT
Maximum SPL1
129 dB peak
Amplifiers
Power Output2
1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
Input Impedance
XLR / ¼”: 40 kΩ balanced / 20 kΩ unbalanced
XLR / ¼” MIC mode: 2260Ω balanced
RCA: 10 kΩ
Controls
Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators
Power, Signal A, Signal B, Standby, Limit, Mic
Connectors
Balanced female XLR/¼” line/mic level input, Balanced female XLR/¼” line level input, Dual Balanced male XLR full range line level out , Balanced male XLR “mix” out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling
On demand, 50 mm variable speed fan
Amplifier Protection
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection
Thermal limiting, excursion limiting
AC Power Input
Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption
(1/8 of full power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material
Impact resistant ABS
Finish
Black paint
Grille
Rugged powder-coated steel
Dimensions (HWD) inches
20.4 × 12.6 × 11.8
Dimensions (HWD) mm
519 x 320 x 300
Weight (Net)
32 lb / 14.5 kg
Available Accessories
K10 Tote, K10 Yoke, M10 Kit-C

A-SS-A2.pdf